Wet Process

CNC-Systems

CNC-System

Fitted with automated systems, CNC systems or robots, these machines will produce results in accordance with your requirements at high throughputs. With their multiple nozzles operated simultaneously or sequentially, these systems are used for all types of mechanical surface treatment (deburring, stripping, shot blasting, shot peening etc.).


If required, a supervisory system can be fitted for real-time full control and monitoring parameters as well as for production traceability.


User-friendly software provides a variety of custom menus for access to a number of functions:

  • Machine status display
  • Fault and alarm management production
  • Monitoring control of variable treatment parameters (part number, operator"s name, pressure, flow rate, treatment time, etc.)
  • Maintenance aids
  • Report output at the end of the cycle.

Peen Forming Machine of fuselage shells for the A318 and A 380
Peen Forming Machine of fuselage shells for the A318 and A 380
CNC Blasting Machine for Aluminium Oxide
CNC Blasting Machine for Aluminium Oxide
Rotary Table Machine; loading station with 3 satellites
Rotary Table Machine; loading station with 3 satellites

Roboblaster for turbine and compressor blades plus vanes

Roboblaster

The operating scope of this high performance blast turbine and injection system with single-arm robot comprises deburring, shot peening, and surface finishing, as well as compression blasting of impact sensitive components of various dimensions. If you are using shotblasting technology and you are planning on implementing or increasing the automation involved in your operation, think robo-handling. The system comprises definition of the size, the performance and the technical parameters of the robot to be used, as well as determination of the design of transport systems.


Air tumble belt batch machines, model range RMBC

Air tumble belt batch machines, model range RMBC

The tumble belt batch machine injection system is equipped with a perfect pressure system including several nozzles. Multiple nozzles reduce the processing time. Descaling of non-sensitive components as a batch application.


Satellite table indexing blasting machines

Satellite table indexing blasting machine

With the satellite table indexing blasting machine, targeted, careful, non-contact finishing of different kinds of components and variable capacities is possible in the same machine. The entire spectrum of blasting applications ranges from delicate deburring to shot peening. The installation is of particular benefit in applications where only specific sections of the components need to be blasted, not the entire surface.


Continuous feed loop belt machines, model SBI

Continuous feed loop belt machines, model SBI

SBI machines are mainly used to clean and descale engine compressor blades and vane assemblies after heating and forging processes prior to vibratory finishing.  A thru-feed, multiple nozzle, ompressed air system incorporating our special polyurethane V-shaped loop conveyor belt, which gently tumbles and conveys the components through the blast stream.

Contact

Tel.:  +49 9533 / 924-0
Fax : +49 9533 / 924-300
E-Mail: info@rosler.com

© 2014 Rösler Oberflächentechnik GmbH | Imprint  |  Privacy Policy  |  Sitemap  |  Print