Excellent, high gloss surface finishes

FBA 24 Turbo - 120 % faster compared to conventional machines with dual vibratory motors

The quality standards for the surface finish of automotive aluminum wheels, especially with regard to their luster, have increased significantly in recent years. This applies equally to OEM's as well as tuning shops. The new Rösler vibratory finishing system FBA 24 Turbo creates a high gloss, mirror finish on the surface of new and used aluminum wheels as well as other automobile and motor bike parts that require a polish.

Nowadays, mirror finishes are a highly attractive optical feature on aluminum wheels. To achieve this desired look on all kinds of wheels, irrespective of how complex their geometrical design may be, Rösler has developed the new vibratory finishing system FBA 24 Turbo. Compared to conventional dual vibratory motor machines on the market the FBA 24 will finish wheels with a diameter of up to 24" about 120% faster. Not only wheels but also other parts mounted under the hood or in other sections of a vehicle, either made from steel, stainless steel and aluminum, can be processed in the FBA 24 to achieve a high gloss surface finish. The optional self-start timer allows beginning of the finishing process without an operator being present so that the first process stage may already be completed, when the official work time begins.

Refurbishment of used wheels made easy
Irrespective of the surface condition of the used wheels, the process parameters for cut-down, fine grinding and high gloss polishing in the FBA 24 Turbo can be set in a manner that guarantees the desired high gloss surface finish. The robust vibratory motor with its infinitely variable rotary speed can be adjusted to any finishing task and to practically any geometrical wheel design found in the market. Ease of operation and the optimum match between machine and compound & media produce excellent surface finishes - in just a few hours. All the consumables like compound and the high quality slow wearing grinding & polishing media are all developed and produced by Rösler.

High-end finishes for wheels produced in high volumes
For new wheels produced in high volumes the polishing stage in the FBA 24 is the most important finishing step. The polishing phase is usually preceded by a cut-down and fine grinding process taking place in a plunge finisher.

In its demonstration center in Untermerzbach Rösler offers the possibility to run finishing trials with the FBA 24. Of course, Rösler also offers surface finishing solutions for wheels that are larger than 24 inches.