Deutsch
Rösler North America
Saving in Resources by Using Closed-Loop Systems
Process Water Recycling Systems
Rösler Process Water Recycling Systems can be connected to virtually any vibratory finishing machine. This increases the savings potential of vibratory finishing. Most vibratory finishing processes such as de-burring, precision grinding, rough grinding, radiussing or polishing are wet processes. Water and cleaning agents (compounds) are the carriers for resultant removal of media and metal fines.
The resultant process water is completely recycled via a closed-loop system . Water and compound savings contribute to significant cost reductions . The system technology is based on special centrifugal technology with an acceleration factor of up to 2000 g, coupled with environmentally-friendly chemistry developed in-house.
Rösler Process-Water Circulation Systems can be adapted to any vibratory finishing application. Semi- and fully-automatic centrifugal systems are available.
Brochures Download
With HA High-Power Separators, the sludge is collected in easy to remove polyurethane baskets.
- Z 800 HA Turbo-Flocâ with effluent and clean water tanks
- Z 800 HA Turbo-Floc with effluent water tank
With ASS High-Power Separators, the sludge is automatically discharged from the rotating drum into the removable sludge container or directly into the Rösler Öko-Pac (Big Bag)for recycling.
- Process-Water Recycling with Turbo-Flocâ Process (can be used with all centrifugal systems)
Adding small amounts of Rösler flocculation compound, improves the separation efficiency of the centrifuge considerably, when using the Turbo-Floc® system. This is especially true when treating non-ferrous parts and brass.
Rosler centrifuges are the most popular waste water treatment systems in the world.