To accelerate the deflashing medium to the high velocity required for efficient deflashing, it is most common to use turbines. Turbines use centrifugal force to accelerate the deflashing medium. Compared with air blast systems, their specific energy consumption is very low. Turbines provide the high coverage needed for most applications.

Contrary to turbines, air blast guns are used for applications where deflashing is desired in defined locations only, or where only small quantities of deflashing medium are required. Air blast guns are used in combination with turbines
to deflash difficult to access areas such as bores or pockets.

Multi-stage screeners and/or airflow separators continuously remove flash, flash particles, fibers and spent deflashing medium from the blast media being circulated within the machine.

A cascade separator continuously removes flash, flash particles, fibers and spent deflashing medium from the circulating blast media.

Automatic, sensor-controlled replacement of consumed deflashing medium ensures consistency in deflashing medium quality (operating mixture).

Exhaust air is freed of dust by special, highly efficient filter cartridges. An automatic backcleaning system for the filter cartridges (the machine need not be halted) permits 24-hour operation.


Extraction from the deflashing zone

Dust is extracted from the deflashing chamber. Depending on the application , various methods are used to recover serviceable deflashing medium and return it to the process.

To prevent dust from re-depositing on the deflashed components due to static charges, all our machines are equipped with an antistatic fluid spray system. Antistatic fluid contained in a tank is sprayed into the deflashing chamber via nozzles.

As an alternative to the manual water/antistatic metering unit, we also offer an automatic  dosing system (connection to water main, selection of mixing ratio via the PLC).

– Electronic control system
– Status and malfunction indicators
– Compliance with relevant CE standards
– Easy to install with plug-in connections between the machine and the control panel