Banner

Cutlery Cleaning/Cutlery Polishing

 

Cutlery Cleaning System RCC with Dryer RCD

Rösler cutlery cleaning system RCC
Models RCC2, RCC3, RCC4, RCC6

Can be offered as stand-alone system or in combination with the RCD dryer (see below)

RCC Rösler Cutlery Cleaner
RCC Rösler Cutlery Cleaner + RCD Rösler Cutlery Dryer
RCD Rösler Cutlery Dryer
RCC Rösler Cutlery Cleaner + RCD Rösler Cutlery Dryer
Cutlery Polishing
Cutlery Cleaning/Polishing

Fields of application:

  • Washing/Cleaning of cutlery after use, and – in combination
         with RCD dryer – spot-free drying and polishing
  • Cutlery of all types – from pastry forks to soup spoons
  • Cutlery made from stainless steel or silver can be
         refurbished (i.e. corrosion spots and light scratches
         can be removed).
Cutlery Cleaning
Linked intallation RCC with RCD



Advantages:

  • Low personnel cost
  • Low energy cost
  • Low consumption of cleaning soap and water due to the
         fact that the cleaning effect is mainly achieved with special
         polishing media
  • Continuous feed operation prevents food residues
         from sticking to the cutlery
  • No pre-treatment of the parts required
  • System hygiene complies with DIN 10510:2008-06
  • No static water: Prevents bacteria growth
  • No negative impact on the room climate
  • No mixing of cleaned and dirty cutlery during the rinse cycle
Cutlery Polishing
Rinsing

Three process steps:

  1. Cleaning of the cutlery → mechanical surface cleaning in polishing media. Depending on the degree of contamination, processing times may vary. No pre-cleaning is required
  2. Rinsing → takes place with fresh water
  3. Drying and polishing → RCD dryer with heated and sanitizing  drying media


Rösler Cutlery Dryer RCD
Models RCD 1, RCD 2 (RCD 2 S – „Silver“ for silver products)

Cutlery Dryer
RCD - Cutlery Dryer

Fields of application:

  • Spotfree drying and polishing
  • Cutlery of all types – from pastry forks to soup spoons

Advantages:

  • Low personnel cost
  • Low energy cost

 

Pure Drying and Polishing System CD

Cutlery Dryer CD 3000 / 5000 / 8000L

CD 8000 L

Cutlery Dryer and Polisher

Process description:

The wet cutlery coming out of the dishwasher is placed into the cutlery drying/polishing system. The vibratory drive induces a spiral movement of parts and drying media through the spiral bottom process channel. The media consists of a plant based, sanitizing fine particle granulate. The media dries and polishes the cutlery and provides a spot free luster on the cutlery surface. The integrated heating system keeps the media at a constant preset temperature and causes the absorbed moisture to evaporate. The cutlery, be it made from stainless steel or silver, leaves the dryer perfectly dry, shiny and sanitary.





Cutlery Dryer and Polisher CD

Fields of application:

  • Spot free drying and polishing
  • Cutlery of all types – from pastry forks to soup spoons

Advantages:

  • No manual drying and polishing after dish washing
  • In a very short time the cutlery obtains a shine like new
         and is hygienically clean
  • The CD system guarantees a consistently high
         surface quality
  • Easy to operate
  • The spiral bottom process channel ensures gentle,
         nick free processing
  • All CD systems operate on a continuous feed basis
  • The CD system is mounted on  wheels making it
         easy to move
  • Control panel integrated into machine frame
  • CE-mark