Maximum throughput and continuous operation - continuous shot-blasting systems

Continuous Flow Machines 3D-Movie  MPEG  Real Media

RMBD Continuous Through Feed Tumble Belt Machines With the development of the continuously operating through feed tumble belt system RMBD, Rösler has set the highest level of standards for fully automated finishing of components. These systems can be used for anything from high-volume bulk components to components with complicated geometries. The high throughput of the RMBD makes this design very economical, and opens up possibilities for flexible production schedules. This gives you the potential for substantial cost savings, without sacrificing product quality or equipment reliability.  Contiuous flow shotblasting systems Types RDGE, RMBD        and SBM

RDGE Wire Mesh Belt Machines Wire Mesh Belt Machines are excellent for an all-round and complete blasting treatment of flat as well as voluminous and very complex components in a continuous process. With 4 or 8 high power Hurricane blast wheels, mounted around the housing (both vertically and horizontally inclined), it is also possible to treat very complex components, which have "pockets" or  difficult to reach areas. A highly wear-resistant wire mesh belt, with tension adjustment, provides the part transport.

The special belt guiding enables the lower blast wheels to blast only through one belt position, which means that any masking is kept to a minimum. Sheet metal parts or high-volume die castings are deburred completely, and undergo surface finishing in one pass in the RDGE.

RHBD Continuous Working Overhead Monorail Machines ("merry-go-round") Rösler overhead rail shot blasting units are recommended for the treatment of sensitive parts which cannot be tumbled in bulk loads, and for particularly complex, heavy, or large parts. Besides the monorail-system there are also the Y-track and power and free continuous system options available.

SBM Continous Loop Belt Conveyor Through Feed Machines Rösler continuous flow shot blasting machines are ideally suited for treating small, high-volume bulk components. The special design of the V-shaped loop belt creates a screw-like movement of the parts through the machine, which ensures homogenous treatment of all parts.

RDR Tube and Bar Blasting Machines These specialised blast machines allow comprehensive and uniform shot blasting treatment of tubes and round bars, in a continuous process. Ideal for integration into an existing production facility.