Buscar

Searched for 2 in 1 pen blue and red ballpoint pen.

Displaying results 21 to 30 of 39.

Centrifuge Technology, Part 2 – Operational and Economic Benefits of Recycling Process Water

disposal costs, and regulations. Mass finishing input and output Environmental [...] finishing machine can use between 10 and up to 250 gallons of water per hour amounting [...] water results in water and compound savings of 90 to 95%. Reduced Municipal

Centrifuge Technology, Part 1 – Water Cleaning Systems Replace Outdated Methods

savings and consumption. Centrifuge technology can reduce the water and compound [...] Previous posts in the Centrifuge Technology series include: Part 1 – “Water Cleaning [...] expertise. In that time, we’ve developed countless efficiencies in both the

Wet Blasting Technology, Part 2 – Comparing Attributes, Advantages to Dry Blasting

Adjustable blast intensities and media concentrations – By increasing or decreasing [...] media concentration in the slurry and the slurry and air pressure, the wet [...] processes use a slurry in which the media is embedded in water. This greatly

Mass Finishing Media, Part 3 – Why Discharging Undersized Media, Maintaining Media Levels Are Crucial

media levels and the mix of new and worn media for precise and safe mass finishing [...] out of balance in several ways, including: Media lodging in the work pieces [...] shapes and sizes can lead to problems such as ineffective finishing and media

Intelligent Multi-Tumbler solution produces absolutely consistent shot peening results on spring band clips

components for lowering weights and reducing CO2 emissions, the worldwide active [...] band clips in batches weighing up to 1,800 kg. A key factor in the customer’s [...] curved throwing blades in “Y” shape and an installed power of 30 kW. The precisely

Forge & Foundry, Part 12 – Media and Compound Selection, Effluent Handling Drive Success

which factors in added benefits including reduced water usage and compound longevity [...] of the industry , the selection of media and compounds utilized in mass finishing [...] demands of the forge and foundry industries specifically and how to achieve precise

Part-on-Part Mass Finishing, Part 3 – Effective Finishing for Ammunition Work Pieces

are annealed and in need of pickling, rinsing, brightening, and drying. Tapered [...] washed, and dried. Casing with Mouth and Neck Tapering Mouth and Neck Toughening [...] brightened, and dried. Bullets and Primers Bullets Like casings, bullets and primers

Automation, Part 2 – Why Automation is Beneficial for Your Business

steel plates and beams and their corrosion protection in a single, automated [...] repeatable manner, reduce the finishing costs, and help reduce lead times. Therefore [...] Series includes: Part 1 – How Robots are Improving Mass Finishing and Shot

Part-on-Part Mass Finishing, Part 1 – Utilizing Work Pieces as the Media

finishing include: Small sizes, approximately 0.1 to 2” in length or width [...] components including rollers and bushings. Small eyelets and hooks. Small [...] parts including sliders and pull tabs. Rollers for small roller and needle

Joint Reconstruction, Part 5 - Mass Finishing for Smooth, polished surfaces

treatment operations including those in the medical industry . Therefore, it [...] decades of experience in mass finishing . In this installment of the Joint Re [...] heads, and the inside of acetabular cups to Ra = 0.8 micro inches as the

«
‹
1
2
3 (current)
4
›
»