Shot blasting

Shot Blast Tip 5 - Monitor Your Abrasive Removal Size In Your Shot Blast Machine

, roslerusa - Torna alla panoramica


The blast media in your shot blast machine  is provided as a "working mix” to achieve your required process.  After a period of blast time it will not perform to the required standard as it has now reduced in size. If it remains in your machine, you can expect to increase the wear and degradation of the blast wheel components together with the recovery system of your machine.  It will increase production times and power consumption because of the longer blast duration required.  An efficient separator will remove unwanted contaminants and undersized media without carrying out good, usable abrasive. It is vital you regularly check the efficiency of your separator and the size at which media, fines and dust are being removed.

Click to read Tip No. 6 Regularly Check Your Wear Parts


For more information on Shot Blasting please visit

Haydn Kitchen New APost written by

Haydn Kitchen

Shot Blasting Technical Manager