Recherche

Recherche de restaurants with a view.

Affiche les résultats de 171 à 180 sur 209.

A Year in Review – Top Blog Posts from 2019

equipment with the right type and amount of media to achieve consistent [...] find a better way to finish and process their products. According to Grand [...] Read more about identifying and maintaining proper levels with your media

Joint Reconstruction, Part 6 – Shot Blasting for Surface Finishing, Coating Preparation, and Increased Component Life Span

slurry is achieved using a special pump and compressed air. Advantages of wet [...] Another advantage of air blasting is that it can be used with metallic [...] bombarded with a stream of blast media. Each pellet forms a little dimple

Joint Reconstruction, Part 5 - Mass Finishing for Smooth, polished surfaces

finishes on a wide array of implants, not only with absolutely repeatable [...] finishing is a highly versatile finishing technology that can be used for a wide [...] implants must have a perfect surface finish without any blemishes. Even

Forge & Foundry, Part 7 – Selecting a Shot Blasting Machine for Forgings, Non-Sand Castings, and Powdered Metal Components

having to deal with this type of dust are equipped with an air wash separator [...] to work with an experienced supplier such as Rosler to select a machine [...] elevator. Machines should also be equipped with a rotary screen drum at the

Joint Reconstruction, Part 4 – Comparing Surface Finishing Methods

use with additive manufactured parts. Because these parts start with a much [...] deburring, edge radiusing after forging , casting , additive manufacturing, and [...] increasing the longevity of an implant, and placing an extremely smooth, high-gloss

Forge & Foundry, Part 6 – Selecting a Shot Blasting Machine for Die Castings

are equipped with an air wash separator that safely removes all of these [...] replacing the auger with a vibratory screen conveyor that allows the automatic [...] for die castings should also be equipped with a rotary screen drum at the

Joint Reconstruction, Part 3 – Surface Finishing Standards

replacements are already made with additive manufacturing with great success [...] interacting with each other with Ra readings of < 1.0 micro inches. A textured [...] roughness associated with this material is an advantage for surface area implanted

Forge & Foundry, Part 5 – Cleaning Features & Dust Precautions for Sand Castings

require turbines with a lot of fire power. Turbines with curved throwing [...] must not only be able to cope with extremely abrasive sand and scale/rust [...] residue in the exhaust air but must also withstand high temperatures of up

Joint Reconstruction, Part 2 – Material Standards

(right) is shown with an acetabular cup lined with ceramic and a ceramic femoral [...] example, the acetabular cup of a hip implant can be lined with polyethylene [...] plate interacting with the femoral head is protected with a polyethylene liner

Forge & Foundry, Part 4 – Selecting a Shot Blast Machine for Sand Castings

elevator. Machines should also be equipped with a rotary screen drum at the [...] done? Sand is extremely abrasive. Even a small amount of sand (0.5-1 percent) [...] we work with our clients to learn about their process, develop a better

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 (current)
19
20
21
›
»