In addition to viewing work piece impingement as an asset, this type of mass finishing also eliminated the need for ceramic, plastic, and other types of media. The only additives required for such part-on-part finishing are water and the respective compounds.
The applications and benefits of each machine provide a range of part-on-part mass finishing uses for sturdy parts in bulk. Let’s compare their designs.
WTA Rotary Vibrators
Rosler developed special WTA rotary vibrators especially for part-on-part processing. These machines not only allow running the finishing/washing process, but also the subsequent drying stage in one single machine.
The WTA series’ unique, innovative equipment design is a key to finishing success. Design attributes as noted in the diagram include:
Rosler WTA rotary vibrator machine design
- A rotary vibrator at the center of the finishing system with a pneumatic unload gate.
- An integrated hot air generator which blows hot air onto the finished work pieces in the work bowl.
- Special dual function drains in the work bowl which use a diaphragm pump to extract process liquid.
- A suction fan which extracts drying air.
- A condensation unit which filters drying air.
A sophisticated compound dosing system allows for multiple finishing tasks within a single, automated process.
Rosler WTA rotary vibrator compound dosing system
Rosler WTA rotary vibrator machines allow fully automatic part-on-part cleaning/degreasing, pickling, passivation, and drying of the work pieces in one single machine without any media.
MK Centrifugal Disk
addition to WTA rotary vibrators, Rosler also offers centrifugal disk finishing
machines that allow part-on-part cleaning/washing and drying in a single
Compared to vibratory equipment, centrifugal disk machines offer the advantage of about 10 times higher processing intensity. However, disk machines should only be used for treating small, sturdy work pieces that will not be damaged (scratched, bent, etc.) by the higher intensity.
Rosler MK centrifugal disk machine design
seen in the diagram, the rotating spinner at the bottom and the stationary work
bowl of centrifugal disk finishing machine create the centrifugal force and the
“vortex” needed to finish work pieces. The centrifugal force of the rotating
spinner impels the mass of the parts and compound up the walls of the
stationary work bowl. Once the parts have lost their kinetic energy, they
collapse back to the center of the spinner. From there, they are accelerated
The Rosler Way
Not sure whether a rotary vibrator or centrifugal disk machine is best for your part-on-part application? We can help! Contact us today to discuss your surface finishing needs.
The complete Part-on-Part Series includes:
- Part 1 – Utilizing Work Pieces as the Media.
- Part 2 – Rotary Vibrators Versus Centrifugal Disk Machines.
- Part 3 – Effective Finishing for Ammunition Work Pieces.
Sign up for enews alerts to be notified of all Rosler blog posts!