Recherche

Recherche de restaurants with a view.

Affiche les résultats de 181 à 190 sur 209.

Forge & Foundry, Part 3 – Shot Blasting & Sand Castings

than 60 percent of all metal castings are made with a sand casting process [...] usually “glued” together with a bonding agent like clay, water, oil, resin [...] Forge and Foundry Series continues with a deeper look at sand castings. While

Structural Steel FAQ, Part 12 – Material Handling Options

machines with an overhead rail transport system are utilized. A variety [...] line would be much less useful without adequate material handling systems. [...] systems into preservation lines to accommodate a wide range of structural steel

Structural Steel FAQ, Part 11 – Preservation Lines

fail with potentially catastrophic consequences if not covered with a suitable [...] included all of the key components mentioned above as well as additional features [...] shot blasting in a single source, preservation lines are a great option for

Structural Steel FAQ, Part 10 – Blast Rooms for Touch-Ups

painting process. The addition of a pressure air blast room that is directly [...] Finishing have solved this issue with the addition of manual blast rooms to automatic [...] way is for an operator to spot treat areas in need of additional cleaning

Medical Instruments, Part 3 – Adjusting Surface Finishing Alongside Medical Advances

work pieces made with additive manufacturing. Adaptive Technology The new [...] developed a computer model of the stinger of bees to produce an additive manufactured [...] Part 3 – Adjusting Surface Finishing Alongside Medical Advances . Sign up

Spinal Implants, Part 2 – Processed to Perfection

Along with the material choice discussed in Part 1 of our Spinal Implants [...] longevity. This is achieved with shot peening mainly spinal rods, screws and [...] Challenges Additive manufacturing is rapidly evolving from a purely prototyping

Medical Instruments, Part 2 – Mass Finishing or Shot Blasting, Which Technique is Best?

smoothest finishes achieved with shot blasting are about Ra = 32-16 micro [...] Part 3 – Adjusting Surface Finishing Alongside Medical Advances . Sign up [...] process – typically a series of processes – for a specific medical instrument

Medical Instruments, Part 1 – Surface Finishing Requirements for Medical Instruments

Part 3 – Adjusting Surface Finishing Alongside Medical Advances . Sign up [...] standards. Whether during an office visit or a complicated surgery, material [...] blasting play a key role, not only as intermediate steps but also for placing

Achieving Specific Finishes for Trauma Implants

How are these finishes achieved? An example of a high-gloss finish on bone [...] and polishing may amount to just a few dollars - a small fraction of the [...] generally must have a very smooth, polished surface with low Ra values. How

Structural Steel FAQ, Part 9 – Removing Residual Blast Media and Dust

equipped with a media brush-off system at the machine exit. By adding a rotary [...] coating. The need for a clean and well-prepared surface after shot blasting mirrors [...] brush unit is augmented by a blow-off system with one or multiple radial fans

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 (current)
20
21
›
»