搜索

Searched for restaurants with a view.

Displaying results 191 to 200 of 209.

Structural Steel FAQ, Part 9 – Removing Residual Blast Media and Dust

equipped with a media brush-off system at the machine exit. By adding a rotary [...] FAQ series will answer How are residual blast media and dust removed from [...] surfaces are properly prepared for painting and coating. The need for a clean

The Importance of Material Selection in Trauma Implants

materials and finishes. We begin with a basic question: What materials are used [...] ductile, meaning they are able to undergo a certain amount of plastic deformation [...] performance and reliability standards. Selected materials must act as bone s

Structural Steel FAQ, Part 8 – Are All Turbines Created Equal?

patterns are the size and shape of the area where blast media strikes a workpiece [...] to as a “hot spot.” Long blast patterns are required to accommodate the [...] designing machines able to accommodate large, heavy, and bulky structural

Structural Steel FAQ, Part 7 – Comparing Commonly Used Blast Machines

Bars and/or pipes are placed on a special transport system known as a skew [...] conveyors are frequently equipped with a blow‐off station at the machine [...] construction and steel trade , shipyards and ship building , and heavy equipment

Optimal Media Mix, Part 2 – Understanding Media Consumption

type. [caption id="attachment_4993" align="alignright" width="270"] Disc [...] higher amplitude and faster travel – the higher the media wear and cut will [...] properties and different bulk densities. Abrasiveness – Both ceramic and plastic

Optimal Media Mix, Part 1 - Identifying and Maintaining Proper Levels

Consider the analogy of a glass and various sizes of rocks and sediment. Filling [...] right type and amount of media to achieve consistent results. Understanding [...] media levels are important, determining and tracking levels, and evaluating

Blade Technology: Straight vs. Curved Blades Explained

straight and curved blades are used, each type offers advantages and disadvantages [...] C shape has a greater curvature angle, allowing for a greater velocity/energy [...] when viewed from the side. As the newer design, curved blades are generally

New: English-speaking training courses at Rösler Academy

such as shot peening. Interested persons can view all seminars with their [...] knowledge in an effective and varied way. The aim is to procure a decisive [...] rosler-academy.com . The trainers of the Rösler Academy, all experts in their

Determining The Need For a Shot Blast Rebuild.

than buying a new machine. Rebuilds also come with the added benefit of [...] auger screws, and anything that comes in contact with abrasives identifies [...] tolerance for downtime as well as cost. There are a few different ways of

Structural Steel FAQ, Part 3 – Evaluating Rust and Mill Scale Pre- and Post-Blast

completely with adherent mill scale and with little if any rust B – Steel [...] normally adequate in a non-corrosive atmosphere and is more labor and cost [...] series will answer How are rust and mill scale evaluated pre ‐ and post ‐ blast

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 (current)
21
›
»