Ricerca

Eseguita ricerca di restaurants with a view.

Mostra risultati 181 a 190 di 219.

A Year in Review – Top Blog Posts from 2019

process their products. According to Grand View Research, Inc., the global [...] equipment with the right type and amount of media to achieve consistent [...] Read more about identifying and maintaining proper levels with your media

Joint Reconstruction, Part 6 – Shot Blasting for Surface Finishing, Coating Preparation, and Increased Component Life Span

Another advantage of air blasting is that it can be used with metallic [...] slurry is achieved using a special pump and compressed air. Advantages of wet [...] The blast media is accelerated by compressed air and thrown at the work

Aerospace, Part 1 – Cost-Effective, Mechanical Finishing for Large, Structural Aircraft Components

Joint Reconstruction, Part 5 - Mass Finishing for Smooth, polished surfaces

array of implants, not only with absolutely repeatable results at zero defects [...] processing intensity. Absolutely homogeneous, all-around finishing results [...] vibrators can be adapted to automated processing at any time with modular auxiliary

Forge & Foundry, Part 7 – Selecting a Shot Blasting Machine for Forgings, Non-Sand Castings, and Powdered Metal Components

having to deal with this type of dust are equipped with an air wash separator [...] excessive pollution within coolant systems, and inefficient adhesion of coatings [...] asked: Are the parts sturdy, allowing aggressive processing, or must they be

Joint Reconstruction, Part 4 – Comparing Surface Finishing Methods

use with additive manufactured parts. Because these parts start with a much [...] deburring, edge radiusing after forging , casting , additive manufacturing, and [...] finishes on additive manufactured parts. Creating Consistency In addition to being

Forge & Foundry, Part 6 – Selecting a Shot Blasting Machine for Die Castings

pieces sturdy enough to allow for somewhat more aggressive processing or must [...] replacing the auger with a vibratory screen conveyor that allows the automatic [...] shot blast machines are equipped with an air wash separator that safely removes

Joint Reconstruction, Part 3 – Surface Finishing Standards

s are already made with additive manufacturing with great success. While [...] areas that are interacting with each other with Ra readings of < 1.0 micro [...] longevity. This is achieved with shot peening and mainly applies to hip

Forge & Foundry, Part 5 – Cleaning Features & Dust Precautions for Sand Castings

must not only be able to cope with extremely abrasive sand and scale/rust [...] require turbines with a lot of fire power. Turbines with curved throwing [...] residue in the exhaust air but must also withstand high temperatures of up

Joint Reconstruction, Part 2 – Material Standards

tibia plates with plastic liners, and acetabular cups lined with ceramic and [...] joint (right) is shown with an acetabular cup lined with ceramic and a ceramic [...] titanium and titanium alloys and cobalt-chromium alloys. Both materials are

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 (current)
20
21
22
›
»