Zoeken

Gezocht naar is chubb a carrier'.

Resultaat 211 tot 220 van 277.

Joint Reconstruction, Part 5 - Mass Finishing for Smooth, polished surfaces

finishing is a highly versatile finishing technology that can be used for a wide [...] finishes on a wide array of implants, not only with absolutely repeatable [...] workstations on a rotating carousel and are dragged through a stationary work

Forge & Foundry, Part 7 – Selecting a Shot Blasting Machine for Forgings, Non-Sand Castings, and Powdered Metal Components

asked: Are the parts sturdy, allowing aggressive processing, or must they be [...] the work pieces be handled by a robot or is a custom-engineered shot blast [...] are equipped with an air wash separator – preferably a dual stage system with

Joint Reconstruction, Part 4 – Comparing Surface Finishing Methods

deburring, edge radiusing after forging , casting , additive manufacturing, and [...] for screws, and additive manufacturing. The smoothness of a surface is pa [...] utilize air and wet blast systems. Shot blasting generally makes a surface

Forge & Foundry, Part 6 – Selecting a Shot Blasting Machine for Die Castings

pieces sturdy enough to allow for somewhat more aggressive processing or must [...] media flow. At a minimum, the media auger must be protected by a tiltable screen [...] the auger with a vibratory screen conveyor that allows the automatic discharge

Joint Reconstruction, Part 3 – Surface Finishing Standards

finish – be it a high-gloss polish for low friction, a textured surface [...] backside of the acetabular cup must be textured to allow bone growth (right) [...] Challenges Additive manufacturing is rapidly evolving from a purely prototyping

Forge & Foundry, Part 5 – Cleaning Features & Dust Precautions for Sand Castings

must not only be able to cope with extremely abrasive sand and scale/rust [...] collector against the risk of dust explosions. Wet dust collectors are a suitable [...] Finishing can learn about your challenges to develop and deliver a solution. Contact

Joint Reconstruction, Part 2 – Material Standards

titanium and titanium alloys and cobalt-chromium alloys. Both materials are [...] ceramic. For example, the acetabular cup of a hip implant can be lined with [...] is protected with a polyethylene liner. The acetabular cup for hip implants

Forge & Foundry, Part 4 – Selecting a Shot Blast Machine for Sand Castings

asked: Are the parts sturdy, allowing for aggressive processing, or must they [...] extremely important to find a supplier that can offer a machine that is perfectly [...] be done? Sand is extremely abrasive. Even a small amount of sand (0.5-1

Forge & Foundry, Part 3 – Shot Blasting & Sand Castings

than 60 percent of all metal castings are made with a sand casting process [...] usually “glued” together with a bonding agent like clay, water, oil, resin [...] turbines allows effective cleaning of huge work piece surface areas in a highly

Structural Steel FAQ, Part 12 – Material Handling Options

systems into preservation lines to accommodate a wide range of structural steel [...] beams, round bars, etc. from a staging area onto a roller conveyor and vice [...] Finishing can learn about your challenges to develop and deliver a solution for