Кузнечное и литейное производство

Forge & Foundry, Part 1 – Shot Blasting Systems

, roslerusa - Назад к обзору

Getting castings and forgings ready for the subsequent processing steps presents some of the toughest surface finishing challenges. Shot blasting machines can handle all of these tasks from removing residual sand, casting shells, flashing, die marks, or scale. Whether cast iron, steel, stainless steel, super alloys, titanium, aluminum, zinc, or magnesium, the comprehensive portfolio of Rosler Metal Finishing blasting systems for the foundry industry enables the optimal process for any requirement.


Shot blasting is an essential part of most forge

and foundry operations and has been used since the late 1800s. This specialized

surface finishing process throws small metal (or mineral) pellets, called blast

media, onto the surface of a work piece at incredibly high speeds, ranging from

200-800 feet per second. The impact on the work pieces from this process is

what blasts the contaminants from the parts and produces the desired surface

finishing effect.


When properly applied prior to finishing, blasting

achieves three key aspects of the finishing process:


  1. Cleans and descales surfaces
  2. Creates a uniform texture on the part and blends the surface
  3. Enhances paint adhesion



Selection of the optimal shot blasting system for

cast and forged work pieces depends on the production method and flow as well

as the material, type, quantity, and size of the pieces in need of processing.


Types of Blasting



When it comes to the two most important surface treatment fields, namely mass finishing and shot blasting, Rosler is the only equipment supplier in the world that can offer both.


Shot blast machines are typically categorized by

the transport system. This allows the parts to move through the blast media

stream. Depending on the parts, systems are distinguished as one of the



  • Batch and continuous systems
  • Tumbling and single-piece flow


Tumbling systems can be used for smaller and less

delicate parts that do not damage each other when they touch while being

transported through the machine. These systems can be batch or continuous

systems, some of our options include:


  • Tumble Belt Blast Machines – Mass-produced components, which can be tumbled are ideal for processing in tumble belt batch machines, no matter what materials they are made from. Anything from small, somewhat delicate die castings to medium-sized forged components can be finished to the highest standard. The batch system can be extended to a fully automatic system with the addition of peripheral loading and unloading equipment.
  • Multi-Tumblers – The central feature of the RMT machine series is the geometry of the rotating barrel. The inside wall of the barrel features specially contoured ridges, while the bottom is shaped in the form of a three-sided pyramid. This unique design creates the innovative "multi-tumbling" action that ensures that the blast stream reaches all surface areas and each part during the processing cycle, thus producing even and consistent blast results. The loading and unloading can be automated allowing for reduced manpower during the operation. Batch-to-batch integrity can be guaranteed.
  • Continuous Feed Loop Belt Blast Machines – Ideally suited for treating small, high-volume bulk components, the special design of the U-shaped loop belt creates a screw-like movement of the parts through the machine, ensuring homogenous treatment of all parts. Gentle tumbling action ensures the parts are evenly blasted without heavy part on part contact. These systems can easily be integrated into existing production flows.


Blast machines for single piece flow are often

used for large, heavy, or delicate parts that might be damaged in a tumbling

operation. These systems can also operate in batch or continuous mode.


  • Spinner Hanger Blast Machines – Overhead rail shot blasting units are recommended for the treatment of sensitive parts which cannot be tumbled in bulk and for particularly complex, heavy, or large parts. The parts are mounted on a hook or tree and transported into the blasting chamber. Simultaneous rotating and oscillating movement of the hook ensures that the blasting media, accelerated by the multiple turbines, reaches every component and provides uniform results. System options include monorail, batch, and continuous feed systems.
  • Wire Mesh Blast Machines – These machines are excellent for all-round, complete and continuous blasting treatment of flat as well as voluminous and complex components. A variable number of turbines mounted around the housing both vertically and horizontally treat very complex components with pockets or difficult to reach areas. A highly wear-resistant, wire mesh belt with tension adjustment transports the part.
  • Continuous Feed Tube, Bar, or Billet Blast Machines – Often used for billets, forged bars, or specialized profiles, these compact turbine blasting systems can achieve high throughput speeds and a near white metal surface quality of up to Sa 3.


Especially high volume parts or customer demands for full integration into existing production systems require special, custom shot blast solutions. Specialty machines include:


  • Engine Block Blast Machines – Used for blast cleaning and descaling of engine blocks of all different sizes after the fettling operation weighing 50-10,000 lbs. (25-5,000 kg). The systems are designed to handle a range of engine block sizes, from small automotive engines to large industrial and marine engines in fully automatic operation. Specially designed manipulators and parts grippers hold the parts in place and guarantee an even finish of the entire engine block.
  • Roboblasters – The operating scope of this one-arm robot comprises deburring, surface finishing, and shot peening of impact sensitive components of various dimensions. The system is tailored to suit the needs of the customer.
  • Crankshaft Blast Machines – A variety of crankshaft types can be optimally cleaned at very high production rates by selective blasting using a multi-stage indexing crankshaft blast machine. Advanced controls can be used to automatically adjust the work piece holder and the blasting pattern to changing part requirements within seconds. Systems like this are ideal for high volume production.


The Rosler Way


Whatever forged or cast work piece you need to process, Rosler Metal Finishing can deliver a solution that meets your individual needs. Contact us today to discuss your unique challenges.


The complete Forge & Foundry Series includes:



Sign up for enews alerts to be notified of all Rosler blog posts!