Поиск

Искал restaurants with a view.

Отображение результатов с 171 по 180 из 202.

Forge & Foundry, Part 6 – Selecting a Shot Blasting Machine for Die Castings

are equipped with an air wash separator that safely removes all of these [...] Our Forge and Foundry Series continues with tips for selecting a shot blasting [...] inspected and emptied regularly. Even better is replacing the auger with a vibratory

Joint Reconstruction, Part 3 – Surface Finishing Standards

replacements are already made with additive manufacturing with great success [...] interacting with each other with Ra readings of < 1.0 micro inches. A textured [...] longevity. This is achieved with shot peening and mainly applies to hip stems

Forge & Foundry, Part 5 – Cleaning Features & Dust Precautions for Sand Castings

not only be able to cope with extremely abrasive sand and scale/rust residue [...] Our Forge and Foundry Series continues with a look at the cleaning required [...] require turbines with a lot of fire power. Turbines with curved throwing blades

Joint Reconstruction, Part 2 – Material Standards

(right) is shown with an acetabular cup lined with ceramic and a ceramic femoral [...] currently titanium and titanium alloys and cobalt-chromium alloys. Both materials [...] liners, and acetabular cups lined with ceramic and ceramic femoral heads

Forge & Foundry, Part 4 – Selecting a Shot Blast Machine for Sand Castings

done? Sand is extremely abrasive. Even a small amount of sand (0.5-1 percent) [...] of sand in the blast media and an air-wash separator taking out any remaining [...] create a highly abrasive environment for the shot blast machine and turbines

Forge & Foundry, Part 3 – Shot Blasting & Sand Castings

Our Forge and Foundry Series continues with a deeper look at sand castings [...] than 60 percent of all metal castings are made with a sand casting process [...] usually “glued” together with a bonding agent like clay, water, oil, resin

Structural Steel FAQ, Part 12 – Material Handling Options

steel plates, all kinds of beams and profiles, and round bars and pipes. Tr [...] machines with an overhead rail transport system are utilized. A variety [...] bars, etc. from a staging area onto a roller conveyor and vice versa. Special

Structural Steel FAQ, Part 11 – Preservation Lines

safety and longevity. Offering painting and shot blasting in a single source [...] blast cleaning, and protective coating and/or painting in a single process [...] While customized options and accessories can be added in, preservation lines

Structural Steel FAQ, Part 10 – Blast Rooms for Touch-Ups

painting process. The addition of a pressure air blast room that is directly [...] avoid injury, keep wear and tear to a minimum, and recover the blast media [...] turbine placement may not clean all the nooks and crannies of the work piece’s

Medical Instruments, Part 3 – Adjusting Surface Finishing Alongside Medical Advances

field and work pieces made with additive manufacturing. Adaptive Technology [...] surface cleaning and texturing after forging/grinding and induction welding [...] or titanium after CNC grinding. And these media even allow mirror polishing

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 (current)
19
20
21
›
»