Поиск

Искал restaurants with a view.

Отображение результатов с 181 по 190 из 205.

Structural Steel FAQ, Part 11 – Preservation Lines

safety and longevity. Offering painting and shot blasting in a single source [...] blast cleaning, and protective coating and/or painting in a single process [...] While customized options and accessories can be added in, preservation lines

Structural Steel FAQ, Part 10 – Blast Rooms for Touch-Ups

painting process. The addition of a pressure air blast room that is directly [...] avoid injury, keep wear and tear to a minimum, and recover the blast media [...] turbine placement may not clean all the nooks and crannies of the work piece’s

Medical Instruments, Part 3 – Adjusting Surface Finishing Alongside Medical Advances

field and work pieces made with additive manufacturing. Adaptive Technology [...] surface cleaning and texturing after forging/grinding and induction welding [...] or titanium after CNC grinding. And these media even allow mirror polishing

Spinal Implants, Part 2 – Processed to Perfection

This is achieved with shot peening mainly spinal rods, screws and cervical [...] inches. Additional processing and time are required to achieve similar [...] systems. Achieving Solutions Individually and when combined as a multi-stage

Medical Instruments, Part 2 – Mass Finishing or Shot Blasting, Which Technique is Best?

media and work pieces creates a constant rubbing and helps polish and smooth [...] smoothest finishes achieved with shot blasting are about Ra = 32-16 micro [...] ome, and even tungsten carbide to softer metals like aluminum and magnesium

Medical Instruments, Part 1 – Surface Finishing Requirements for Medical Instruments

instruments and how mass finishing and shot blasting play a key role, not [...] must be able to withstand frequent autoclave sterilization and exposure [...] components. An example of a production chain using both mass finishing and shot

Achieving Specific Finishes for Trauma Implants

How are these finishes achieved? An example of a high-gloss finish on bone [...] polishing may amount to just a few dollars - a small fraction of the total component [...] Finishing to help you find a better way and achieve exact results. Contact

Structural Steel FAQ, Part 9 – Removing Residual Blast Media and Dust

equipped with a media brush-off system at the machine exit. By adding a rotary [...] prepared for painting and coating. The need for a clean and well-prepared surface [...] Why Remove Residue Ancillary machine attachments and processes may be required

The Importance of Material Selection in Trauma Implants

questions about trauma implant materials and finishes. We begin with a basic [...] over a bone plate without being damaged. High Tensile Strength and Load [...] bending loads and must be able to withstand the related forces. Relatively Low

Structural Steel FAQ, Part 8 – Are All Turbines Created Equal?

In addition to specifically designing machines able to accommodate large [...] Blast turbines accelerate and throw the blast media against the workpieces [...] including the speed of a sports car and the torque of a heavy-duty truck. Like

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 (current)
20
21
›
»