搜索

Searched for restaurants with a view.

Displaying results 171 to 180 of 203.

Joint Reconstruction, Part 4 – Comparing Surface Finishing Methods

material. Achieving Solutions Individually and when combined as a multi-stage [...] costs per piece can be as low as a few cents. With more complex, multi-step [...] radiusing after forging , casting , additive manufacturing, and machining

Forge & Foundry, Part 6 – Selecting a Shot Blasting Machine for Die Castings

machines are equipped with an air wash separator that safely removes all of these [...] castings should also be equipped with a rotary screen drum at the elevator [...] Our Forge and Foundry Series continues with tips for selecting a shot blasting

Joint Reconstruction, Part 3 – Surface Finishing Standards

replacements are already made with additive manufacturing with great success [...] roughness associated with this material is an advantage for surface area implanted [...] the implant areas that are interacting with each other with Ra readings

Forge & Foundry, Part 5 – Cleaning Features & Dust Precautions for Sand Castings

Our Forge and Foundry Series continues with a look at the cleaning required [...] not only be able to cope with extremely abrasive sand and scale/rust residue [...] that are equipped to prepare the surface of sand castings as well as collect

Joint Reconstruction, Part 2 – Material Standards

(right) is shown with an acetabular cup lined with ceramic and a ceramic femoral [...] on implants are currently titanium and titanium alloys and cobalt-chromium [...] described as an up-and-comer because it is quickly becoming an excellent

Forge & Foundry, Part 4 – Selecting a Shot Blast Machine for Sand Castings

questions must be asked: Are the parts sturdy, allowing for aggressive processing [...] equipped with a rotary screen drum at the elevator exit to remove any larger [...] the blast media and an air-wash separator taking out any remaining sand

Forge & Foundry, Part 3 – Shot Blasting & Sand Castings

surface areas in a highly productive and cost-efficient manner. Air and wet [...] Our Forge and Foundry Series continues with a deeper look at sand castings [...] than 60 percent of all metal castings are made with a sand casting process

Structural Steel FAQ, Part 12 – Material Handling Options

machines with an overhead rail transport system are utilized. A variety [...] steel plates, all kinds of beams and profiles, and round bars and pipes. Tr [...] shot blast machines and preservation lines. They are also the preferred system

Structural Steel FAQ, Part 11 – Preservation Lines

cabin are appropriately dried and cured for improved adhesion and life [...] included all of the key components mentioned above as well as additional features [...] steel components are prone to rust quickly and fail with potentially catastrophic

Structural Steel FAQ, Part 10 – Blast Rooms for Touch-Ups

expose adequately cleaned areas and may still leave other areas in need [...] painting process. The addition of a pressure air blast room that is directly [...] way is for an operator to spot treat areas in need of additional cleaning

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 (current)
19
20
21
›
»