Buscar

Searched for restaurants with a view.

Displaying results 191 to 200 of 231.

Joint Reconstruction, Part 5 - Mass Finishing for Smooth, polished surfaces

only with absolutely repeatable results at zero defects, but also at s [...] processing intensity. Absolutely homogeneous, all-around finishing results [...] vibrators can be adapted to automated processing at any time with modular auxiliary

Forge & Foundry, Part 7 – Selecting a Shot Blasting Machine for Forgings, Non-Sand Castings, and Powdered Metal Components

having to deal with this type of dust are equipped with an air wash separator [...] high media impact velocity along with the abrasion of the media/oxide dust [...] excessive pollution within coolant systems, and inefficient adhesion of coatings

Joint Reconstruction, Part 4 – Comparing Surface Finishing Methods

use with additive manufactured parts. Because these parts start with a much [...] deburring, edge radiusing after forging , casting , additive manufacturing, and [...] finishes on additive manufactured parts. Creating Consistency In addition to being

Forge & Foundry, Part 6 – Selecting a Shot Blasting Machine for Die Castings

are equipped with an air wash separator that safely removes all of these [...] pieces sturdy enough to allow for somewhat more aggressive processing or must [...] replacing the auger with a vibratory screen conveyor that allows the automatic

Joint Reconstruction, Part 3 – Surface Finishing Standards

replacements are already made with additive manufacturing with great success [...] rounded edges, etc. – but also total compliance with the specified tight d [...] areas that are interacting with each other with Ra readings of < 1.0 micro

Forge & Foundry, Part 5 – Cleaning Features & Dust Precautions for Sand Castings

must not only be able to cope with extremely abrasive sand and scale/rust [...] residue in the exhaust air but must also withstand high temperatures of up [...] require turbines with a lot of fire power. Turbines with curved throwing

Joint Reconstruction, Part 2 – Material Standards

tibia plates with plastic liners, and acetabular cups lined with ceramic and [...] joint (right) is shown with an acetabular cup lined with ceramic and a ceramic [...] titanium and titanium alloys and cobalt-chromium alloys. Both materials are

Forge & Foundry, Part 4 – Selecting a Shot Blast Machine for Sand Castings

asked: Are the parts sturdy, allowing for aggressive processing, or must they [...] elevator. Machines should also be equipped with a rotary screen drum at the [...] thick manganese steel and additionally lined with replaceable wear liners

Joint Reconstruction, Part 1 – Expertise for Endoprosthetics

Forge & Foundry, Part 3 – Shot Blasting & Sand Castings

than 60 percent of all metal castings are made with a sand casting process [...] results with every cycle. Sand Casting Basics Sand casting, also known as [...] usually “glued” together with a bonding agent like clay, water, oil, resin

«
‹
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 (current)
21
22
23
24
›
»